Fiberscopes

Standard Range Fiberscopes

Standard Range Fiberscopes

Standard Range Fiberscopes achieve the highest image quality in 6.0 mm, 8.4 mm and 11.3 mm diameter at lengths of up to 3.0 m. All models feature four-way angulation and interchangeable optical tip adapters.

Small Diameter Fiberscopes

Small Diameter Fiberscopes

Small diameter fiberscopes can inspect narrow areas or where access is limited and are available in 0.64 mm, 2.4 mm or 4.1 mm. Each model has an ocular focus to ensure that the individual operator's eyesight is accomodated and can be attached to CCTV and photographic equipment for image recording.

Special Feature Fiberscopes

Special Feature Fiberscopes

Industrial fiberscopes, initially developed and approved for the Pratt & Whitney PT6 engine, but has since become used for the inspection of many small engines and fine diameter pipework. There are some RVI applications that cannot be satisfied by a standard model fiberscope. Olympus has always been at the forefront of application solutions, and when a situation arises where a standard instrument will not provide the desired results, then Olympus has responded with advice on optimal instrument use in that application. This occasionally results in the introduction of a special instrument designed to meet that specific requirement - these are therefore known as special feature fiberscopes. This is not to say, however, that they cannot be used in other applications. The information below describes each model, together with its design application, but the specification may well suit a particular inspection you need to undertake.

All © Copyrights Reserved To SiRiUS 2015