Eddy Current Probes

Standard Eddy Current Probes

Standard Eddy Current Probe

Olympus eddy current probes consist of the acquired brands of Nortec and NDT Engineering. We offer more than 10,000 standard and custom designed eddy current probes, standard references, and accessories. This section features many of the standard design probes that are available in a wide range of diameters, frequencies, and connector styles. Olympus also offers custom probe designs to meet specific inspection requirements. Eddy current probes may be designed to match the contours of a part or shaped to fit into a fixture for fast and accurate inspections.

Eddy Current Array.

Eddy Current Array

Olympus NDT is pleased to introduce the new Doubler Edge Skin Crack Inspection solution, which utilizes the latest ECA technologies for subsurface detection. Drastically reduced inspection times, C-scan imagery, large probe coverage, encoded scan, and data/setup recording capabilities are just a few of the many benefits of OmniScan technology. Intuitive imagery with the C-scan allows for higher probability of detection and better reproducibility, and also makes it easier to identify the rivet row and edge on-screen. Thanks to its wide coverage, probe positioning is not critical. This coverage also enables both edges of the doubler to be covered during the same scan. In comparison with the conventional method of performing this type of inspection, this solution is a major step forward in terms of reduced inspection time.

Flexible PCB-Based Eddy Current Array Testing

Flexible PCB-Based Eddy Current Array Testing Flexible PCB-Based Eddy Current Array Testing/> Flexible PCB-Based Eddy Current Array Testing/>

Key Features

32 Coilsat different location

51mm of Coverage

Very Flexible

Two rows of coils to improve resolution

Detachable cable

Inspection in one pass

Rotating Bolthole Scanners

Rotating Bolthold Scanners

Olympus extensive line of high performance eddy current scanners is available for use with Nortec Eddy Current Flaw Detectors. With a wide range of features consisting of speed ranges from 600 to 3000 rpm, frequency ranges from 100 Hz to 6 MHz, multiple connector types, and multiple probe types, our scanners offer a full range of application solutions. Some of the more common applications are: airframe hole inspection with or without fasteners, wheel bolt hole inspections, surface inspections, post production testing for cracks, tube plug testing, and low frequency inspections through multiple aircraft skin layers.

Weld Probes

Weld Probes

Weld probes offer a cost effective method to inspect in-service ferrous welds. The inspection method is a clean, non-hazardous alternative over magnetic particle inspection, which does not require the removal of coatings such as paint or oxidation. Weld probes offer sensitivity to flaws in varying orientations and may also be used as a general purpose surface probe on any ferrous material.

All © Copyrights Reserved To SiRiUS 2015